Tensometric measuring pipe liquid flow meter

Article Sidebar

pdf (Українська)
Published: Dec 28, 2021
DOI: https://doi.org/10.47049/2226-1893-2021-3-31-48
Keywords:
strain gauge, flow meter, measurement, error, viscosity, flow velocity, geometric dimensions

Main Article Content

V. Tsatsko
Odessa National Maritime University
S. Dranchuk
Odessa National Maritime University
O. Kochetkov
Odessa National Maritime University
V. Mashin
Odessa National Maritime University
T. Gaur
Odessa National Maritime University
N. Vityuk
Odessa National Maritime University

Abstract

The flow meter of a liquid was considered, in which, for increasing the reliability and accuracy of the measurements, liquid flow measurements were proposed for the difference in static pressure in two different pipe sections using two strain gauges. The influence of geometrical sizes and physical properties of a liquid on the magnitude of the error is considered. The structural scheme of the strain gauge measurement system for liquid flows is proposed, which allows conducting research in a wide range of flow rates.

Article Details

How to Cite
Tsatsko, V., Dranchuk, S., Kochetkov, O., Mashin, V., Gaur, T., & Vityuk, N. (2021). Tensometric measuring pipe liquid flow meter. Herald of the Odessa National Maritime University, (66), 31-48. https://doi.org/10.47049/2226-1893-2021-3-31-48
Issue
No 66 (21): Herald of the Odessa National Maritime University
Section
Ship machines, mechanisms and systems
Author Biographies

V. Tsatsko, Odessa National Maritime University

Ph.D, Senior Lecturer Department «Exploitation of marine electric equipment and means of automation»

S. Dranchuk, Odessa National Maritime University

PhD, Associate Professor Department «Exploitation of marine electric equipment and means of automation»

O. Kochetkov, Odessa National Maritime University

PhD, Associate Professor Department «Exploitation of marine electric equipment and means of automation»

V. Mashin, Odessa National Maritime University

Senior Lecturer Department «Exploitation of marine electric equipment and means of automation»

T. Gaur, Odessa National Maritime University

Senior Lecturer Department «Exploitation of marine electric equipment and means of automation»

N. Vityuk, Odessa National Maritime University

PhD., associate professor Department of «Operation of ship electrical equipment and automation equipment»

References

1. Sayt kompanii «Pramen». [Website of the Pramen company]. URL: http://npopramen.ru/production (accessed 15.12.2019). (in Russian).
2. Petrosov D.S., Guryushkina N.G. , Korshunova O.N. Ilyasafov A.D. (1995) Tenzometricheskiy rashodomer. [Strain gage flow meter]. Patent Rossii. № 2037796 (in Russian).
3. Antokhov O.D., Haur T.O., Nikiforov V.I., Tsatsko V.I. (2018) Tenzometrychnyy vytratomir ridyny. [Tensometric fluid flowmeter]. Visnyk Odes'koho natsional'-noho mors'koho universytetu, vol. 4, № 57, pp.121-130.
4. Rukovodyashchyy dokument (1985) Sistemyi trubnyie i ballastnyie sudovyie. Pravila i normyi proektirovaniya. [Pipe and ballast ship systems]. RD 5.570-285, pp. 83. (in Russian).
5. Simanin N.A., Sazanov I.I. (2012) Gidravlika. Uchebnik. [Hydraulics]. Penza:PGTA. (in Russian).
6. Idelchik I.E. (1992) Spravochnik po gidravlicheskim soprotivleniyam